manualshive.com logo in svg

Ricoh Aficio Color 4006, Operating Instructions Manual, Page: 90 / 228

Share
Download
Ricoh Aficio Color 4006 Operating Instructions Manual Download Page 90

77

C

opying

Color Creation

Color Creation

Color Conversion—Converting a Selected Color into a Different Color

This function converts a selected color of an original into a different color on the copy.

Reference

For copy samples, 

☛

 see page 16.

Note

❐

Up to 4 colors can be converted at one time.

❐

Colors you can convert to:

Yellow, Red, Magenta, Green, Cyan, Blue, Black and White

❐

Colors that can be used after conversion:

Yellow, Orange, Red, Magenta, Green, Cyan, Blue, Yellow Green, Black, White, Beige, Pink, Marine Blue, Purple and
User colors

❐

This function can be made more or less sensitive to the color to be converted. It can be adjusted within five levels from
“Narrow” to “Wide”. 

☛

 see page 161.

For example, if red is selected as the color to be converted, “Narrow” will result in only red being converted, and “Wide”
will result in other colors close to red being converted.

❐

This function can be used in Full Color mode.

1

Press the [Color Creation] key.

2

Press the [Color Conversion] key.

Summary of Contents for Aficio Color 4006





































































































































































































































Reviews:

No comments