manualshive.com logo in svg

Ricoh Aficio Color 4006, Operating Instructions Manual

Share
Download
Ricoh Aficio Color 4006 Operating Instructions Manual Download Page 205

192

Adjusting Color, Density, and Focus

Adjusting Color, Density, and Focus

After shading, you can adjust the color tone, image density, or manual focusing.

Note

❐

When setting the glass mount film holder, manual focus adjustment is required.

❐

You can adjust the focus manually for 35mm film only.

Color Tones in Film Scanning

Use these modes when you want to adjust the overall color tone of copies. Also use these modes when you
use negative film, because the color tone of copies varies with the film brand. You can adjust the tone of
copies by adjusting Cyan, Magenta, and Yellow (three basic colors).

Notes on color tone adjustments

❐

If the color balance differs slightly from your image, you can also change the tones with the Color  Adjustment (

☛

 see

page 193) or Color Balance Adjustment (

☛

 see page 92) function.

❐

If dark parts are too black, change the U.C.R. Adjustment to level 3 (default = level 5). 

☛

 see page 96.

Density Adjustment

❐

Density can be set not only with this display, but also with Image Density Adjustment.  However, when adjusting for the
projector, we recommend you adjust the image density with this display.

Summary of Contents for Aficio Color 4006





































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands