Ricoh Aficio Color 4006 Operating Instructions Manual Download Page 153

Page: 153 / 228

140

Clearing Misfeeds

CAUTION

• When removing misfed paper, do not touch the fusing section because it could be very hot.

Note

❐

When clearing misfeeds, do not turn off the operation switch. If you do, your copy settings are cleared.

❐

To prevent misfeeds, do not leave any torn scraps of paper within the machine.

❐

If paper misfeeds occur repeatedly, contact your service representative.

❐

When clearing misfeeds, make sure that all units and levers are returned to their original position and all covers are
closed.

❐

Do not touch originals in the document feeder when a paper misfeed occurs in the machine. If you do the machine
cannot determine which originals have been copied and which haven’t.

Check the Misfeed Location Display

The display shows the location of misfed paper.

Clearing Misfeeds

Summary of Contents for Aficio Color 4006





































































































































































































































Search results

Summary of Contents for Aficio Color 4006

Reviews:

Ricoh Aficio Color 4006, Operating Instructions Manual, Page: 153 / 228

Search results

Summary of Contents for Aficio Color 4006

Reviews: