Ricoh Aficio Color 4006 Operating Instructions Manual Download Page 18

Page: 18 / 228

Where it is & what it is

Operation Panel

1. Touch panel display

You can see the operation status and messages
here.

2. Screen Contrast knob

You can change the brightness of the display.

3. Special Accessory key

Press to use the optional film projector unit.

☛

see page 171.

4. User Tools key

Press to change the default setting.

☛

see page 151.

5. Adjustment key

Press to adjust the image or color balance, or to
make user colors.

☛

see page 91.

6. Editor pen

Use to designate areas.

7. Program key

Press to select the program mode.

☛

see page 54.

8. Clear Modes key

Press to clear the previously entered settings.

9. Interrupt key

Press to make interrupt copies.

☛

see page 52.

10. Energy Saver key

Press to enter/exit the Energy Saver mode.

☛

see page 52.

11. Counter key

Press to display the total number of copies made.

12. Main Power indicator

This indicator lights up when the main power
switch is turned on, and goes off when the switch
is turned off.

13. On indicator

This indicator lights up when the operation switch
is turned on, and goes off when the switch is
turned off.

14. Operation switch

Press this switch to turn the power on (the On
indicator lights up). To turn the power off, press
this switch again (the On indicator goes off).

15. Clear/Stop key

Press to cancel the copy number entered. While
copying, press to stop copying. This key is also
used to clear data.

16. Start key

Press to start copying.

17. # key

Press to enter data in selected modes.

18. Number keys

Use to enter the desired number of copies. They
are also used to enter data.

Summary of Contents for Aficio Color 4006





































































































































































































































Search results

Summary of Contents for Aficio Color 4006

Reviews:

Ricoh Aficio Color 4006, Operating Instructions Manual, Page: 18 / 228

Search results

Summary of Contents for Aficio Color 4006

Reviews: