manualshive.com logo in svg

Ricoh Aficio Color 4006, Operating Instructions Manual, Page: 112 / 228

Share
Download
Ricoh Aficio Color 4006 Operating Instructions Manual Download Page 112

99

Adjustment and Color

Memory

Program User Color—Storing User Colors

Program User Color—Storing User Colors

In addition to the base colors, you can store up to 15 customized colors into memory (User Color).

Reference

Color sample chart, 

☛

 see page 22.

If your machine is Edit type, you can sample the user color. 

☛

 see page 102.

Note

❐

There are two ways to make user colors as follows:

•

Adjusting a selected base color

•

Mixing colors manually with  Number  keys

❐

Up to 15 colors can be stored.

❐

The total percentages of the mixed colors must be 255% or less.

❐

If the total percentage of the mixed color is over 255%, the copier cannot create the color properly and the results will
appear different.

❐

If the total percentage of the mixed colors is too low, it may not be bonded to the paper properly resulting in a change
in image density.

❐

The appearance of user colors might vary slightly according to the image type you have selected (e.g. Photo, Text,
etc.).

Adjusting Colors Based on the Selected Color

1

Press the  Adjustment  key.

2

Press the [Prog. User Color] key.

3

Select the key you wish to store the color in.

Summary of Contents for Aficio Color 4006





































































































































































































































Reviews:

No comments