manualshive.com logo in svg

Ricoh Aficio Color 4006, Operating Instructions Manual, Page: 6 / 228

Share
Download
Ricoh Aficio Color 4006 Operating Instructions Manual Download Page 6

vi

How to Read this Manual

Symbols

In this manual, the following symbols are used:

R

 WARNING:

This symbol indicates a potentially hazardous situation that might result in death or serious injury when you
misuse the machine without following the instructions under this symbol. Be sure to read the instructions, all of
which are described in the Safety Information section.

R

 CAUTION:

This symbol indicates a potentially hazardous situation that might result in minor or moderate injury or property
damage that does not involve personal injury when you misuse the machine without following the instructions
under this symbol. Be sure to read the instructions, all of which are described in the Safety Information section.

*The statements above are notes for your safety.

Important

If this instruction is not followed, paper might be misfed, originals might be damaged, or data might be lost. Be
sure to read this.

Preparation

This symbol indicates the prior knowledge or preparations required before operating.

Note

This symbol indicates precautions for operation, or actions to take after misoperation.

Limitation

This symbol indicates numerical limits, functions that cannot be used together, or conditions in which a particu-
lar function cannot be used.

Reference

This symbol indicates a reference.

[   ]

Keys that appear on the machine’s panel display.

  

  

Keys built into the machine’s operation panel.

How to Read this Manual

Summary of Contents for Aficio Color 4006





































































































































































































































Reviews:

No comments