manualshive.com logo in svg

Ricoh Aficio Color 4006, Operating Instructions Manual, Page: 175 / 228

Share
Download
Ricoh Aficio Color 4006 Operating Instructions Manual Download Page 175

162

User Tools

Special Mode Program(s)

Auto Color Calibration

When the tone of a specific color is strong or the color tone of copies is different from
that of originals, perform this function. This function adjusts the balance of the 4 basic
colors.

1. Press the [Auto Color Calibration] key.
2. If your machine has the printer option installed, select copy mode or printer mode.

Then press the [Start] key.

3. Press the [Print Start] key.

 Note

❐

The test pattern is delivered to the copy tray.

4. Set the test pattern on the exposure glass (platen glass). Then press the [Scan

Start] key.

Limitation

You cannot set the test pattern in the document feeder.

 Note

❐

To return to the previous setting, repeat steps 1 to 3 and press the [Prev. Setting]
key.

Copy Mode/Printer Mode

Menu

ADF Thin paper

ADF Mixed Sizes

ADF Auto Paper Select

Full Color Copy Sorting

Auto Sort Mode

Description

Use when changing the type of originals to be fed. Select this function to avoid damag-
ing thin originals (40 - 52g/m

2

, 11-14 lb) set in the document feeder.

 Note

❐

Default: Off

By default, you cannot set originals of different sizes at one time in the document
feeder. You can cancel this setting.

 Note

❐

Default: Off

❐

If you select [On], the copying speed will be reduced.

❐

When setting different length originals, all originals must be flush with the back fence
of the document feeder.

❐

Smaller size originals might be skewed a little.

By default, the Auto Paper Select is selected when you set originals in the document
feeder. You can cancel this setting.

 Note

❐

Default: On

You can disable sorting, stacking, or stapling in Full Color mode to maximize quality of
full color copies.

 Note

❐

Default: Off

You can have the machine select Sort mode automatically when you insert two or more
originals in the document feeder and make two or more copies from each original.

 Note

❐

Default: On

Special Mode for
Copying

Use to recall the special modes set by your service representative.

Summary of Contents for Aficio Color 4006





































































































































































































































Reviews:

No comments