Home
/
Ricoh
/
Aficio Color 4006
/
Operating Instructions Manual

Ricoh Aficio Color 4006, Operating Instructions Manual, Page: 180 / 228

Share

Page: 180 / 228

Ricoh Aficio Color 4006 Operating Instructions Manual Download Page 180

167

Others

Do’s and Don’ts

R

R

R

R

R

CAUTION:

r

•

When you move the machine, unplug the power cord from the wall outlet to avoid fire or electric
shock.

•

When the machine will not be used for a long time, unplug the power cord.

• Do not touch areas on or around the fusing unit. These areas get hot.
• After making copies continuously, you might feel the exposure glass is heated. But this is not a malfunction.
• You might feel warm around the ventilation hole. This is caused by exhaust air, and not a malfunction.
• Do not turn off the operation switch while copying. When turning off the operation switch, make sure that copying is

completed.

• The machine might fail to produce good copy images if there should occur condensation inside caused by tempera-

ture change.

• Do not open the covers of machine while copying. If you do, misfeeds might occur.
• Do not move the machine while copying.
• If you operate the machine improperly or a failure occurs on the machine, your machine settings might be lost. Be

sure to take a note of your machine settings.

• Supplier shall not be liable for any loss or damages resulting from a failure on the machine, loss of machine settings,

and use of the machine.

Do’s and Don’ts

«
...
178
179
180
181
182
...
»

Summary of Contents for Aficio Color 4006





































































































































































































































Reviews:

No comments