manualshive.com logo in svg

Ricoh Aficio Color 4006, Operating Instructions Manual, Page: 149 / 228

Share
Download
Ricoh Aficio Color 4006 Operating Instructions Manual Download Page 149

136

B

Loading Paper

Reference

Regarding paper sizes that can be set, 

☛

 see page 202.

Note

❐

 If you want to change the paper size, 

☛

 see 148.

Non-recommended Paper for Paper Trays

❐

Folded, curled, creased, or damaged paper

❐

Torn paper

❐

Perforated paper

❐

Paper with conductive or low electrical resistance coating such as carbon or silver coating

❐

Thermal paper, art paper

❐

Thin paper that has low stiffness

❐

Damp paper

❐

Wavy paper

❐

Stapled paper

❐

Translucent paper

❐

OHP transparencies

Note

❐

Load paper with the side you wish to copy onto face-down in the paper trays. If copies are curled, try turning the copy
paper over in the tray. If there is no improvement, change to copy paper with less curl.

❐

Correct curls in copy paper before loading.

❐

Fan copy paper to get air between the sheets before loading.

❐

When making two-sided copies, do not load paper in the paper tray to copy on the reverse side. Use the bypass tray.

☛

 see page 49.

Loading Paper in the Paper Tray

1

Pull out the paper tray until it stops.

2

Remove the back fense.

B

Loading Paper

Summary of Contents for Aficio Color 4006





































































































































































































































Reviews:

No comments