Ricoh Aficio Color 4006 Operating Instructions Manual Download Page 204

Page: 204 / 228

191

Projector

nit

Operation

Press the [Shading] key.

Note

❐

The machine will start shading.

Pull out the film strip holder with the base film.

Lift the fresnel lens, place the film inside the po-
sitioning sheet, and lower the fresnel lens.

Note

❐

Place the film face down.

❐

If the film is curled, the copy image may be out of fo-
cus. In this case, make the cut out film position sheet
a little smaller than the film size and use it to hold the
film down.

If needed, adjust the color, density, or focus.

Reference

For details,

☛

see page 192.

If needed, select the copier modes.

Reference

For details,

☛

see page 195.

Press the Start key.

Choose your next job.

Reference

For details,

☛

see page 196.

TRSR0Z0E

TRSR0P0E

1: Fresnel lens
2: Film

Selecting the Film Type and Performing Shading

Summary of Contents for Aficio Color 4006





































































































































































































































Search results

Summary of Contents for Aficio Color 4006

Reviews:

Ricoh Aficio Color 4006, Operating Instructions Manual, Page: 204 / 228

Search results

Summary of Contents for Aficio Color 4006

Reviews: