manualshive.com logo in svg

Ricoh Aficio Color 4006, Operating Instructions Manual, Page: 168 / 228

Share
Download
Ricoh Aficio Color 4006 Operating Instructions Manual Download Page 168

155

Changing the Machine’

s

Settings

User Tools

Setting You can Change with the User Tools (System Settings)

Reference

For how to access the user tools, 

☛

 see page 151.

System setting

Description

The key tone sounds when a key is pressed. This beeper can be turned on or off.

 Note

❐

Default: On

Choose whether the machine beeps when it becomes ready for a copy run after
power up.

 Note

❐

Default: On

❐

When the “Panel Tone” is set to Off, the beeper does not sound even if the “Ready/
Tone” is set to On.

The copy counter can be set to show the number of copies made (Count Up), or the
number of copies remaining to be made (Count Down).

 Note

❐

Default: Up

The machine turns itself off automatically to conserve energy after your job is finished,
after the selected time. This function called “Auto Off”. The time can be set from 1 to
120 minutes.

 Note

❐

Default: 60 minutes

The machine enters Energy Saver mode automatically after your job is finished, after
the selected time. The time can be set from 10 to 990 seconds (in 10 seconds steps),
or off. In Energy Saver mode, the panel display turns off.

 Note

❐

Default: On (60 seconds)

The machine returns to its prioritized mode automatically a certain time after your job
is finished, after the selected time. The time can be set from 10 to 990 seconds (in 10
seconds steps), or off.

 Note

❐

Default: On (60 seconds)

When Interleave Print is turned on and a print job comes along while the machine is
busy printing another job, this delay specifies how long the machine will wait before
switching to the priority print job. The time can be set from 10 to 990 seconds.

Note

❐

Default: On (60 seconds)

❐

The Optional Printer is required to use this function.

Menu

Panel Tone

Ready/Tone

Copy Count Display

Auto Timer

Control Panel Off Timer

System Reset Timer
(Printer Option Required)

Function Reset Timer
(Printer Option Required)

Summary of Contents for Aficio Color 4006





































































































































































































































Reviews:

No comments