manualshive.com logo in svg

Ricoh Aficio Color 4006, Operating Instructions Manual, Page: 129 / 228

Share
Download
Ricoh Aficio Color 4006 Operating Instructions Manual Download Page 129

116

Selecting Modes for Designated Areas

Reference

The available modes for area editing depend on the area shape 

☛

 see page 128.

For functions that cannot be used together in area editing, 

☛

 see page 128.

More than one mode can be set for designated area, however, there are some limitations, 

☛

 see page 128.  And up to 7

patterns of modes can be set together.

Note

❐

Up to 20 groups of multiple areas can be edited.  All the areas should belong to groups 1-20.
You can select up to seven job patterns for at most 20 groups.  After you have set seven patterns, the copier will only
allow you to choose the pattern of a previous group.
If you change the settings for one group, it will change the settings for all other groups with the same job pattern.
However, if you have set a Paint, Color Background, or Frame/Line, changing the color in one group will not affect
other groups.  (Up to 15 colors can be selected.)

❐

The modes that can be set for inside areas as follows:

•

Color/Image Adjustment: Image Density, Color Mode, Original Type, Image Adjustment, Color Adjustment, Color

Balance Adjustment

•

Color Creation: Color Conversion, Color Erase, Color Background Paint

Note

❐

The editing functions available when specifying area with Frame/Line mode are Width and Color.

❐

Color/Image Adjustment’s default setting:

  • Image Density - Manual Image Density
  • Color Mode - Black & White
  • Original Type - Text

❐

You can change the default settings. 

☛

 see page 151.

❐

Depending on the shapes of the areas, coloring or deleting near the outlines of the areas might not do well, or the
outlines might become uneven.

❐

The way to set modes is basically the same as for the entire image. For details, refer to each page.

•

To fill an area with a selected color, select the Paint.

•

Image Density 

☛

 see page 37.

•

Original Type 

☛

 see page 41.

•

Color Adjustment 

☛

 see page 95.

•

Color Conversion 

☛

 see page 77.

•

Color Background 

☛

 see page 80.

•

Color Mode 

☛

 see page 38.

•

Image Adjustment 

☛

 see page 96.

Area Shapes

Basic modes

1

Designate the areas you wish to modify.

Note

❑

For designating areas, 

☛

 see page 106.

2

Press the [Area Edit] key.

•

Color Balance Adjustment 

☛

 see page 92.

•

Color Erase 

☛

 see page 79.

•

Save Area 

☛

 see page 118.

•

Changing Job Settings for the Entire Image

☛

 see page 122.

•

Changing Modes 

☛

 see page 123.

•

Adding Areas 

☛

 see page 124.

•

Erasing a Group 

☛

 see page 126.

•

Delete Area 

☛

 see page 117.

Selecting Modes for Designated Ar

eas

Summary of Contents for Aficio Color 4006





































































































































































































































Reviews:

No comments