Ricoh Aficio Color 4006 Operating Instructions Manual Download Page 123

Page: 123 / 228

110

Designating Ar eas

Right Angle Polygon and Polygon

Set your original on the exposure glass.

Press the [Area Editing] key.

Press the

(R.A. Polygon) or

(Polygon)

key.

Mark the first point with the editor pen.

Mark the next points.

Note

❐

When you use Right Angle Polygon mode, mark points
that make right angles.

After making the last point, press the [Confirm
Selection] key.

Press the [Area Edit] key, specify your settings,
then press the [OK] key.

Reference

For details,

☛

see page 116.

Press the Start key.

Closed Loop

Limitation

❐

If you specify an area with Closed Loop, you cannot specify any additional areas with other selection tools.

Note

❐

When you color areas with the Closed Loop, the area boundary may shift depending on the image.

Set your original on the exposure glass.

Press the [Area Editing] key.

Press the

(Closed Loop) key.

Touch on a point inside a closed loop.

Summary of Contents for Aficio Color 4006





































































































































































































































Search results

Summary of Contents for Aficio Color 4006

Reviews:

Ricoh Aficio Color 4006, Operating Instructions Manual, Page: 123 / 228

Search results

Summary of Contents for Aficio Color 4006

Reviews: