Ricoh Aficio CL2000, Operating Instructions Manual

Page: 67 / 733

55
5. Troubleshooting
Error & Status Messages on the Control
Panel
❖ ❖ ❖ ❖
Status Messages
Messages/Second messages Status
Calibrating... The printer is calibrating the color. Wait until "Ready" appears
on the panel display.
Energy Save Mode The printer is in Energy Saver (low-power) mode. No action is
required.
Hex Dump Mode The printer receives data in hexadecimal numbers in Hex
Dump mode. Turn off the printer after printing, and then turn
it back on.
Offline The printer is offline. Make the printer online by pressing the
{{{{
On Line
}}}}
key to start printing.
Loading Toner... The printer is loading the toner. Wait for a while.
Please Wait The printer is initializing the development unit or HDD. Wait
for a while.
This message may appear when printing with small size paper
continuously. Wait for a while.
This message may appear when continuously printing a large
volume of pages. Wait for a while.
Processing... The printer is processing the print job. Wait for a while.
Ready The default ready message. The printer is ready for use. No ac-
tion is required.
Resetting Job... The printer is resetting the print job. Wait until "Ready" ap-
pears on the panel display.
Waiting... The printer is waiting for the next data to print. Wait for a
while.
Warming Up... The printer is warming up and not ready. Wait until "Ready"
appears on the panel display.