Ricoh Aficio CL2000, Operating Instructions Manual

Page: 183 / 733

Options
29
1
A
Press the
{{{{
Enter #
}}}}
key.
The following message appears
on the panel display.
Note
❒
The value in brackets at the
upper right is the number of
characters entered.
B
Press the
{{{{U U U U}}}}
or
{{{{T T T T}}}}
key to se-
lect characters, and then press
the
{{{{
Enter #
}}}}
key.
The pointer (
k
) moves to the
next character position.
C
Continue entering the key.
Note
❒
The characters that can be
used are ASCII 0x20-0x7e (32
bytes).
❒
If you press the
{{{{
Escape
}}}}
key,
the pointer (
k
) moves to the
previous character position.
D
After entering the key, press
the
{{{{
Enter #
}}}}
key twice.
The screen returns to step
K
.
LLLL
Press the
{{{{U U U U}}}}
or
{{{{T T T T}}}}
key to dis-
play "WEP Setting".
A
Press the
{{{{
Enter #
}}}}
key.
B
Press the
{{{{U
U U
U}}}}
or
{{{{T
T T
T}}}}
key to dis-
play "Active", and then press
the
{{{{
Enter #
}}}}
key.
The following message appears
on the panel display.
Note
❒
When setting the WEP Set-
ting to "Active", you will
need to enter the WEP key. If
you have not entered the key,
be sure to enter it.
❒
If you have entered the WEP
key and change the setting,
press the
{{{{U U U U}}}}
or
{{{{T T T T}}}}
key to
display "No", and then press
the
{{{{
Enter #
}}}}
key.
C
Press the
{{{{
Enter #
}}}}
key.
Note
❒
The value in brackets at the
upper right is the number of
characters entered.
SSID: [ 0]
k
SSID: [ 1]
A
SSID: [ 1]
A
k
SSID: [32]
AAAAAAAAAAAAAAAA
IEEE 802.11b:
WEP Setting
WEP Setting:
*Not Active
WEP Setting:
Active
Change WEP Key:
Yes
WEP Key: [ 0]
k