Ricoh Aficio CL2000, Operating Instructions Manual

Page: 391 / 733

Operating Instructions Administrator Reference
192
Access Control
Use the access command to view and configure access control. You can also specify two or more access
ranges.
❖
❖ ❖
❖
Reference
msh> access
❖ ❖ ❖ ❖
Configuration
msh> access
✩
range start-address end-address
•
✩
represents a target number between 1 and 5. (Up to five access ranges can be registered and
selected.)
Example: To specify accessible IP addresses between 192.168.0.10 and 192.168.0.20:
msh> access 1 range 192.168.0.10 192.168.0.20
Note
❒
The access range restricts the workstations from which printing is possible by means of an ad-
dress. If you do not need to restrict printing, make the setting “0.0.0.0”.
❒
The entry is invalid if the start address is greater than the end address.
❒
Up to five access ranges can be specified. The entry is invalid if the target number is omitted.
❒
When using a Web browser, telnet or SmartDeviceMonitor for Client/Admin, you can use an IP
address that has not been restricted by access control.
❖
❖ ❖
❖
Access Control Initialization
msh> access flush
Note
❒
This restores the factory-default settings so that all access ranges become "0.0.0.0".