Ricoh Aficio CL2000 Operating Instructions Manual Download Page 133

Page: 133 / 733

2. Printer Utility for Mac

By using Printer Utility for Mac, you can download fonts, change the name of the printer and so on.

Limitation

❒

If a Macintosh and printer are connected by USB, you cannot use Printer Utility for Mac.

Note

❒

Printer Utility for Mac is included on the CD-ROM labeled “Printer Drivers and Utilities”.

❒

Printer Utility for Mac requires Mac OS 7.6.1-9.x, or Mac OS X 10.1.x or 10.2.1. Mac OS X 10.0.x
and 10.2 are not supported.

Installing Printer Utility for Mac

Follow these steps to install Printer Utility for Mac on the machine.

AAAA

Start the Macintosh.

BBBB

Insert the CD-ROM into the CD-ROM drive.

The CD-ROM icon appears.

CCCC

Double-click the hard disk icon to open it.

DDDD

Double-click the CD-ROM icon.

The contents of the CD-ROM appear.

EEEE

Double-click the

[

Mac OS 8 and 9

]

folder.

Note

❒

Under Mac OS X, double-click the [

Mac OS X

] folder.

FFFF

Double-click the

[

PS Utility

]

folder on the CD-ROM.

Summary of Contents for Aficio CL2000


























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Aficio CL2000

Reviews:

Related manuals for Aficio CL2000

Brands by name

Popular brands

Ricoh Aficio CL2000, Operating Instructions Manual

Search results

Summary of Contents for Aficio CL2000

Reviews:

Related manuals for Aficio CL2000

Brands by name

Popular brands