Ricoh Aficio CL2000, Operating Instructions Manual

Page: 489 / 733

Operating Instructions Client Reference
23
Installing the PCL 5c or RPCS Printer Driver
Preparation
To use the print server, install the printer driver by selecting “Network printer server”, and then select
the Windows 2000/XP, Windows Server 2003, or Windows NT 4.0 shared printer. For more infor-
mation about how to install and settings, see Administrator Reference.
This section assumes the client has already been configured to communicate with a Windows
2000/XP, Windows Server 2003, or Windows NT 4.0 print server. Do not begin the following proce-
dure until the client is set up and configured correctly.
Limitation
❒
When using a print server connected to the printer via SmartDeviceMonitor for Client, you cannot
use Recovery Printing and Parallel Printing.
❒
When using Windows XP as a print server, the client computer cannot receive notification of print
job completion.
AAAA
Close all applications that are running.
BBBB
Insert the CD-ROM into the CD-ROM drive.
Auto Run will start the installer.
Important
❒
Never have two versions of the same printer driver installed on your system at the same time.
When upgrading to a new version of the printer driver, delete the old version, and then install the
new one.
Note
❒
Auto Run might not automatically work with certain OS settings. In this case, launch "Setup.exe"
located on the CD-ROM root directory.