Ricoh Aficio CL2000, Operating Instructions Manual

Page: 407 / 733

Operating Instructions Administrator Reference
208
WINS
Use the wins command to configure the WINS server settings
For more information about WINS server settings, see p.242 “Configuring a WINS Server” .
❖ ❖ ❖ ❖
Configuration
Use the set command to make WINS active or inactive.
msh> set wins {on|off}|msh> set wins {on|off}
• "on" means active and "off" means inactive.
❖ ❖ ❖ ❖
Viewing setting
The following command displays the WINS server IP address.
msh> wins
Example out put:
wins: primary server 0.0.0.0 secondary server 0.0.0.0
Note
❒
If DHCP is used to start from the network, the current WINS server address is displayed. This
address, however, is not displayed if DHCP is not used.
❒
If the IP address obtained from DHCP differs from the WINS IP address, the DHCP address is
the valid address.
❖ ❖ ❖ ❖
Address configuration
Use this command to configure a WINS server IP address.
msh> wins {primary|secondary} IP_address
Note
❒
Use the "primary" to configure a primary WINS server IP address.
❒
Use the "secondary" to configure a secondary WINS server IP address.