78
SCT-1100 Weight Transmitter
Set the vertical distance between labels
Enter a value, expressed in mm; if using continuous form labels set the value at 00
Set the print direction
= direct printing
= upside down printing
Set the format type
= format created through the instrument
= format created with the program or on PC
Transmit and temporarily save the programmed label to the labeler. Turning the labeler off deletes
the label data. See
.
Alignment of the label in the printer
By pressing
, a label with the previously selected fields, but with fixed weight values, is
printed
The print test depends on the selected functioning mode:
•
mode: the first time the fields with the kg unit of measure are printed, the second time
the fields with the lb unit of measure are printed, and so on
•
,
,
,
modes: simple printing
•
mode: not settable
•
mode: the first time the fields without the
message are printed, the second time
the fields with the
message are printed, and so on
•
mode: the first time the fields without the
message are printed, the second time
the fields with the
message are printed, and so on
•
and
mode: when the
is pressed a selection menu appears with the
following items:
*
= simulates the printing of the first totalization relative to the zero registry
*
= simulates the printing of a further totalization relative to the zero registry
*
= simulates the printing of the partial total relative to the zero registry
*
= simulates the printing of the first totalization relative to the one registry
*
= simulates the printing of a further totalization relative to the one registry
*
= simulates the printing of the partial total relative to the one registry
*
= simulates the printing of the general total
•
mode: the first time the fields with the pieces number and APW are printed, the
second time the fields without the pieces number and APW are printed
Parameter
Description
Table 6-21. Label Creation Parameters (Continued)
