Rice Lake SCT-1100, Technical Manual

Page: 63 / 88

Communications 59
Extended Weight Read Command With Date and Hour
[CC]REXD<CR LF>
Instrument response in the
 or in the  mode: extended string ( Section 6.5.2 on page 64 ).
Instrument response in the

mode: multi-scale string ( Section 6.5.3 on page 65 ).
Weight Read Command
[CC]READ<CR LF>
Instrument response: standard string (
Section 6.5.1 on page 63 ).
Weight Reading Command With Sensitivity Times 10
[CC]GR10<CR LF>
Instrument response: standard string (
Section 6.5.1 on page 63 ).
Reading Command of MicroVolts Relative to the Weight
[CC]MVOL<CR LF>
Instrument response in
 mode: standard string ( Section 6.5.1 on page 63 ).
Response of the instrument in

and

mode: multi-scale string ( Section 6.5.3 on page 65 ).
If the instrument is in the

mode (scale with independent channels) or in the

mode (scale with
dependent channels and digitally equalized) the weight value is read relative to the active channel; to read the
values of the other channels (if configured) switch to the desired channel. See
Converter Channel Switching
Command on page 60 .
If the instrument is in the

mode (scale with independent channels) it is possible to read simultaneously
the values for all the configured channels.
Reading Command of Converter Points Relative to the Weight
[CC]RAZF<CR LF>
Instrument response in
 mode: standard string ( Section 6.5.1 on page 63 ).
Response of the instrument in

and

mode: multi-scale string ( Section 6.5.3 on page 65 ).
If the instrument is in the

mode (scale with independent channels) or in the

mode (scale with
dependent channels and digitally equalized) the weight value is read relative to the active channel; to read the
values of the other channels (if configured) switch to the desired channel. See
Converter Channel Switching
Command on page 60 .
If the instrument is in the

mode (scale with independent channels) it is possible to read simultaneously
the values for all the configured channels.
Tare Command
[CC]TARE<CR LF> or [CC]T<CR LF>
Instrument response: [CC]OK<CR LF> if the command has been received; the instrument’s response does not
mean necessarily that the instrument executes the tare.
Zero Command
[CC]ZERO<CR LF> or [CC]Z<CR LF>
Instrument response: [CC]OK<CR LF> if the command has been received; the instrument’s response does not
mean necessarily that the instrument executes the zero.
Clear Command
[CC]CLEAR<CR LF> or [CC]C<CR LF>
Instrument answer: [CC]OK<CR LF> if the command has been received, no answer for the
on/off command; the
instrument answer does not imply that the command is executed.
The command works also inside the setup mode.
Note
Note