Rice Lake SCT-1100, Technical Manual

Page: 25 / 88

Operation 21
8. Selecting one of the following and press to confirm.
•  – the instrument controls all primary instruments. There cannot be more than one secondary
instrument set to no. If  is selected:  displays. This parameter is used to set the type of
communication protocol between the primary and secondary instruments.
-  – the primary instrument communicates with the secondary instrument transmitting all
visible parameters on the display.
-  – The primary instrument communicates with the secondary instrument transmitting all
visible parameters on the display and the weight value.
•  – the instrument is a secondary instrument weight repeater and does not control primary
instruments. If  is selected:  displays and a prompt to enter a number.
- Enter the number of the primary instrument from which the sum starts. Use to select the digit to
be modified and or to increase or decrease the digit.
- Press to confirm.  displays. Set the  parameter to allow the visualized weight on the
secondary instrument’s printer.
9. Press to confirm settings.  displays.
10. Press . Set the primary instrument mode.
•  – SCT
•

– Not applicable at this time
•  – Not applicable at this time
•

– Not applicable at this time
•  – Not applicable at this time
11. Press to confirm settings. If there is more than one primary instrument, the secondary instrument
displays  .
12. Press . Set the parameters for the primary instruments.
•  – set the decimals of the secondary instrument’s visualized weight
•  – set the unit of measure of the secondary instrument’s visualized weight
•  – set the division of the secondary instrument’s visualized weight
•  – set the maximum of the secondary instrument’s visualized weight
If the primary instruments are configured as totalizer, the secondary instrument cannot do totalization.
In primary instruments, enter a code between 01 and 32 to uniquely identify each primary instrument in the
menu
        
. See Section 4.2 on page 32 .
Listen Only Secondary Instrument
Additional secondary instruments may be set as weigh repeaters. The keys pressed on these secondary instruments
are not repeated on the primary instruments.
When the listen only secondary instrument is turned on, it displays the weight of the primary instrument or
automatically selects the sum of the weights if there is more than one primary instrument connected.
If there is more than one primary instrument, the listen only secondary instrument can display:
• The sum of the weights with  displaying every ten seconds
• The weight of a selected primary instrument and  , in which  is the number of the selected primary
instrument
The the listen only secondary instrument displays the central segments alternated with the messages  or 
if communication is unsuccessful.
Listen only secondary instruments work only when one secondary instrument is set in a non listening mode.
Note
Note