Rice Lake SCT-1100, Technical Manual

Page: 78 / 88

74 SCT-1100 Weight Transmitter
6.11.1 Formatting Data and Layout
Depending on the printer selected in the

parameter (

or

), the displayed parameters may differ.

Prints a ticket number – The ticket number is a sequential number between 1 and 65535; It is stored in memory
even when the instrument is turned off
Secondary mode
 =
no ticket number is printed
 =
ticket number is printed when the primary instrument prints are executed
 =
ticket number is printed when the sum is printed
 =
ticket number is always printed

= reset the ticket number, sets it to 1 and leaves the NTIK step unchanged
Primary mode

=
does not print the ticket number

=
prints the ticket number; in the totalizer functioning mode it is printed only in the single totalizations

=
prints the ticket number; in the totalizer functioning mode it is printed just in the partial total

=
prints the ticket number; in the totalizer functioning mode it is printed in the totalizations as well as in
the partial total
 =
pressing resets the ticket sequence number
NOTE: The ticket number, if programmed, is printed after the weight data.

Print two empty lines at the end of each printout (if

is selected in

) or an end label (if

is selected
in

)
Secondary mode
 =
does not print the page end

= prints the end page when the primary instruments prints are executed
 =
prints the end page when the sum is printed
 =
end page is always printed
Primary mode

= does not print the page end

= prints the end page; in the totalizer functioning mode it is printed just in the single totalizations

=
prints the end page; in the totalizer functioning mode it is printed just in the partial total

=
prints the end page; in the totalizer functioning mode it is printed in the totalizations as well as in the
partial total

Sets a terminator – When connecting a printer it is often necessary to transmit one of the following protocols in
order to define the end of the print line

=
CR (for DP190, LP542P/S, TPR)

=
CR LF (for EPSON LX300 and TMU295)

Print formatting – this parameter enters a submenu for selecting the weight data to print and the print layout. Depend-
ing on the type of printer selected in the

step (

or

), the parameters displayed may differ. See
Section 6.11.1 on page 74 .

Set the number of ticket copies to be printed, valid for any type of printout and functioning mode.
Parameter Description

Enables the default printing of each parameter
NOTE: This parameter is not displayed in the secondary mode.

Select fields to be printed:

= gross weight;

= net weight;

= tare weight
NOTE: This parameter is not displayed in the secondary mode.
Table 6-20. Data Format and Layout
Parameter Description
Table 6-19. Print Programming Menu (Continued)




 



 



