44
SCT-1100 Weight Transmitter
5.0
Calibration
The type of calibration used is dependent on the type of application chosen for the instrument: independent
channels (
) and dependent channels for (
), which can be digitally equalized. See the parameter
in
5.1
Procedure
Use this procedure to set the scale(s). To connect more than four cells, it is necessary to trim the cells.
1. Turn on the instrument and press
while the firmware version displays.
displays. Press
.
2. Press
or
to scroll through channel types (
,
,
).
3. Press
when the desired channel type is displayed to select it.
displays.
4. Press
until
displays.
5. Press .
displays.
6. Press .
displays.
7. Press
and then press
or
to set the number of channels (
-
).
8. Press
to
confirm.
displays.
9. Press
or
until
displays.
10. Press .
displays.
11. Press
and then press
or
to set the decimal (
,
,
,
).
12. Press
to confirm.
displays.
13. Press
and then press
or
to set the weight units (
,
,
,
).
14. Press
to
confirm.
displays.
15. Press
. and then pess
or
to set divisions (
1
, 2, 5, 10, 20, 50).
16. Press
to confirm.
displays.
17. Press
. The rightmost digit flashes.
18. Press
to select the digit to be modified and
or
to decrease or increase the digit to set the total
capacity of the scale or the first range in case of multi-range functioning.
19. Press
to
confirm.
displays.
20. Press
and then press
to select the digit to be modified and
or
to set the second range or set
to all zeros, if only one range.
21. Press
to confirm.
displays.
22. Press
until the instrument displays
.
23. Press
to
confirm.
displays momentarily and the instrument reboots.
Perform this procedure for each connected channel.
C
Note
