Communications
79
6.11.2 Save the Label to Permanent Memory
The formats must be saved to the label printer permanent memory once format programming is complete.
To download the label format to the label printer:
1. Press
when
displays.
2. Press .
displays.
3. Press
to save the formatted label to the labeler permanent memory.
The green LED blinks when saving the data to the labeler and stops once the save process is complete.
Do not press buttons on the labeler or the instrument while the green LED is blinking.
The label format is now saved to the labeler and is ready to print. The data remains in the labeler memory even
when the labeler is turned off.
Repeat the format download and saving process each time the label or data in it is modified, or if it is necessary to
change the functioning mode after programming the label.
It may be possible to create or customize labels using software supplied with the labeler. Refer to the labeler
manual for specific instructions.
C
Note
Note