Respironics Trilogy 02, Technical Information

Page: 315 / 424

P
AGE
10-12
T
RILOGY
S
ERVICE
& T
ECHNICAL
I
NFORMATION
1002735, V
ER
. 05
10.3 T
RILOGY
200 C
HECKOUT
P
ROCEDURE
This chapter details the test procedures that should be performed by the clinician prior to connecting the device
to the patient. Test the Active PAP, Active Flow, and Passive circuit types if you want to do a complete checkout
on the device. The tests should be performed as described in order to verify proper operation of the device.
Some of the procedures in this chapter require you to change settings on the device.
10.3.1 T
OOLS
R
EQUIRED
•
Universal Porting Block
•
Active PAP Exhalation Device
•
Active Flow Exhalation Device with Flow Sensor
•
Trilogy Universal Active PAP Tube Adapter
•
Whisper Swivel II
•
Test Lung
•
Small Flat Head Screwdriver
10.3.2 V
ISUAL
I
NSPECTION
1. Verify that the enclosure is not broken and that all applicable screws are in place.
2. Verify that the device handle, SD Card door, and detachable battery are secure and in good work-
ing order.
3. Verify that the rubber feet are on the bottom of the device.
10.3.3 I
NITIAL
S
ETUP
1. Connect the power cord to the device and then to an AC outlet.
2. Attach the test lung to the patient connection end of the desired circuit (Active PAP, Active Flow, or
Passive).
3. Follow the instructions in System Setup Section to access the Setup Screen.
NOTE
The actual circuit configuration to be used on the patient should be used to perform the system checkout.