Respironics Trilogy 02, Technical Information

Page: 138 / 424

P
AGE
7-1
T
RILOGY
S
ERVICE
& T
ECHNICAL
I
NFORMATION
1002735, V
ER
. 05
C
HAPTER
7: M
AINTENANCE
7.0 C
HAPTER
O
VERVIEW
This chapter describes the Maintenance intervals and procedures for the Trilogy Ventilator.
7.1 R
OUTINE
M
AINTENANCE
Routine maintenance involves periodic checking, cleaning, and or replacing the following item as necessary:
•
Air Inlet Filter
•
Enclosures
7.1.1 A
IR
I
NLET
F
ILTER
Under normal usage, you should clean the inlet filter at least once every two weeks and replace it with a new
filter every six months or sooner if needed.
7.1.2 E
NCLOSURES
Commensurate with hospital or homecare policies, Respironics recommends cleaning the cabinet and
inspecting for damage as necessary.
7.2 P
REVENTIVE
M
AINTENANCE
The following Preventive Service procedures will be followed by authorized service personnel at the intervals
outlined in the maintenance schedule below. Preventive Maintenance must be performed by Respironics or a
Respironics’ trained location.
Your new Philips Respironics Trilogy ventilator includes a PM Service Due label affixed to the bottom of your
device. The Service Date line on the label is blank, which allows you to document the date when service is
due. The Service Hours line will have 10000 hours recorded. Service is due every 10000 blower hours or 24
months whichever comes first depending on the usage of the device or 17,500 blower hours for blower
maintenance.
During the initial install, you will need to record the date and hours (if not already written) on the blank label to
maximize your in-service interval. Record the service date as 24 months from the date first placed on a
patient. Record the hours as 10000 blower hours for initial usage.
The device blower hours are listed in the device software in the information menu.
A new blank label should be applied to the Trilogy Ventilator after the 10000 hours or 24 months maintenance
and after the 17,500 Blower Maintenance has been performed. The label should be completed according to
the table below with the new next maintenance due blower hours and new next maintenance due date (should
be 24 months from date of completed Maintenance) before returning the ventilator.