Respironics Trilogy 02, Technical Information

Page: 313 / 424

P
AGE
10-10
T
RILOGY
S
ERVICE
& T
ECHNICAL
I
NFORMATION
1002735, V
ER
. 05
V
ERIFY THE
E
XTERNAL
B
ATTERY
F
UNCTION
(O
PTIONAL
)
1. Connect AC Power to the device and verify that the green AC LED is lit.
2. Connect the external battery cable to the external battery and to the ventilator.
3. Verify that the external battery symbol is shown on the display and some level of charge is present.
4. Disconnect the AC Power source from the device.
•
Verify that the AC Power Disconnected alarm message appears on the display and the green
AC LED is not lit. Press Reset.
•
Verify that the external battery symbol shows the level of charge as noted in the previous step
and the device continues to operate.
•
Verify that the external battery symbol has a black box around it to indicate that it is in use.
5. Reconnect the AC Power source.
A
LARM AND
E
VENT
L
OG
C
LEAN
-U
P
1. In the Setup Menu, select Alarm Log .
2. Press Clear to clear the log file.
3. Press Yes to confirm.
4. Press Finish to complete.
5. In the Setup Menu, select Event Log .
6. Press Clear to clear the log file.
7. Press Yes to confirm.
8. Press Finish to complete.
R
ESULTS
All portions of this checkout procedure should be completed prior to connection to the patient. If any of the
tests fail to complete as indicated, if possible, correct the error, clear the alarm and resume testing.