Respironics Trilogy 02, Technical Information

Page: 79 / 424

P
AGE
5-30
T
RILOGY
S
ERVICE
& T
ECHNICAL
I
NFORMATION
1002735, V
ER
. 05
5.9 V
IEWING THE
E
VENT
L
OG
From the Main Menu screen, you can select Event Log to access the Event Log Screen. An example is shown
below.
The event log displays a list of all events that have occurred, such as ventilator setting changes, ventilator
inoperative conditions, alarms, etc., in chronological order with the most recent events displayed first. When
the Trilogy is in Limited Menu access mode, the event log is not available. It can be viewed and cleared when
in Full Menu access mode. You can page through the event log if it is multiple pages. The number of pages
appears in the upper right corner of the panel (in the example above, shown as 1/6).
In the event log descriptions, any description beginning with a 1: or 2: is a prescription change event. The 1
represents a change to a primary setting and the 2 represents a change to a secondary setting. This is
followed by the setting that was changed.
The last two columns indicate setting and alarm changes. If the entry is a setting change, the first column
shows the old setting value and the last column shows the new setting. If the entry is an alarm, the first column
shows the value that triggered the alarm and the last column shows the number of seconds that the alarm was
active.
NOTE
In Full Menu access mode, you can press the Right (clear) button to clear the event log if desired.