12. Serial RapidIO Registers > RapidIO Physical Layer Registers
281
Tsi576 User Manual
June 6, 2016
Integrated Device Technology
www.idt.com
12
OUTPUT_R
Output Retried
Outbound port has received a packet-retry control symbol and
cannot make forward progress. This bit is set when the Output
Retry-stopped bit (bit 13) is set. This bit is cleared after receiving a
packet-accepted or packet-not-accepted control symbol.
R
0
13
OUTPUT_RS
Output Retry-stopped
Outbound port has received a packet-retry control symbol and is in
the output retry-stopped state.
R
0
14
OUTPUT_ERR
Output Error-encountered
Outbound port has encountered (and possibly recovered from) a
transmission error. This bit is set when the Output Error-stopped
bit (bit 15) is set.
R/W1C
0
15
OUTPUT_ERR_
STOP
Output Error-stopped
Outbound port is in the output error-stopped state.
R
0
16:20
Reserved
N/A
R
0
21
INPUT_RS
Input Retry-stopped
Inbound port is in the input retry-stopped state.
R
0
22
INPUT_ERR
Input Error-encountered
Inbound port has encountered (and possibly recovered from) a
transmission error. This bit is set when bit 23, Input Error-stopped,
is set.
R/W1C
0
23
INPUT_ERR_STOP
Input Error-stopped
Inbound port is in the input error-stopped state.
R
0
24:26
Reserved
N/A
R
0
27
PORT_W_PEND
Port-write Pending
Port has encountered a condition which required it to issue an I/O
logical port-write maintenance request.
R/W1C
0
28
Reserved
N/A
R
0
(Continued)
Bits
Name
Description
Type
Reset
Value
