manualshive.com logo in svg

Renesas IDT Tsi576, User Manual

Share
Download
Renesas IDT Tsi576 User Manual Download Page 85

85

Tsi576 User Manual

June 6, 2016

Integrated Device Technology

www.idt.com

4. 

Internal Switching Fabric

This chapter describes the main features and functions of the Tsi576’s Internal Switching Fabric (ISF). 
It includes the following information:

•

“Overview” on page 85

•

“Functional Behavior” on page 86

•

“Arbitration for Egress Port” on page 88

4.1

Overview

The Internal Switching Fabric (ISF) is the crossbar switching matrix at the core of the Tsi576. It 
transfers packets from ingress ports to egress ports and prioritizes traffic based on the RapidIO priority 
associated with a packet and port congestion.

The ISF has the following features:

•

Full-duplex, non-blocking, crossbar-based switch fabric

•

10 Gbits/s fabric ports allow up to 10x internal speedup

•

Manages head-of-line blocking on each port

•

Cut-through and store-and-forward switching of variable-length packets

Summary of Contents for IDT Tsi576



















































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands