Regio Midi manual
Chapter 8
Operating modes
45
For handling of the Occupancy button in combination with central control, please see the
section entitled
Central control
, below.
Occupancy detector
For local control of the operating mode between the pre-set operating mode and Bypass or
Occupied, an occupancy detector is connected.
When occupancy is indicated, the controller changes operating mode to Bypass or Occupied.
If you want to be able to enter the room temporarily without activating Presence (to, for
example, pick something up) it is possible to configure a power-up delay. This means that
Presence is not activated until the power-up delay has expired. The Presence delay can be set
to a value between 0 and 60 minutes (FS=0 min).
In Bypass on presence, there is a switch-off timer, which means that if there is no occupancy
indication during this time (FS=10 min), the controller will return to the pre-set operating
mode.
