Regio Midi manual
Chapter 13
Indications
57
Chapter 13 Indications
LED
All controllers without a display, except RC-CH and RC-CTH, have a LED shaped like a
thermometer on the front. A red indication is shown when heating control is functional and a
blue indication is shown when cooling control is active. When there is something wrong with
the controller or if a setting is incorrect, the LED will flash red and blue.
Figure 17. The LED
The occupancy button
In models without a display, the occupancy button has the following indications:
•
Occupied: Fixed green indication
•
Standby: Flashing green indication
•
Bypass: Fixed green indication with a short flash
•
Off and Unoccupied: No indication
For each of the above running modes, indications can be configured to behave in the following
ways using Regio tool
©
:
•
Off = 0
•
Flashing = 1
•
Fixed light = 2
•
Fixed with short flash = 3
Figure 18. The occupancy button
On Regio models with a display, these indications are shown in the display. See the chapter
Display handling
.
Communication LED
When the frame has been removed, a LED is visible in the right edge of the controller. It lights
up green when the controller is sending information.
