22
|
City Series CST60E
installer's information
NO
TE
• When the unit is in position, detach the handles by removing 6
screws from each one. Ensure the screws are replaced in the holes
they were removed from. The handles are recyclable.
Unit Assembly Prior to Installation
Side Standoff Assembly
The CST60E has four standoffs (2 on each side) that you must assemble before
installation. The standoffs are shipped flat. Fold the standoffs and install them
by sliding the two tabs into the slots on the unit. Bend the tabs and secure the
opposite end of each standoff with one screw.
Leveling Legs
There are two levelling legs on each side that can be adjusted with the tool
found in the manual package.
Unit Assembly Prior to Installation
Before you start
Removing the unit from the pallet
Side standoff assembly CV60E
The CV60E has 4 standoffs, 2 on each side that need assembly before installing.
The standoffs are shipped in a flat position -- fold the standoff and install the
standoff onto the unit by sliding the 2 tabs into the slots on the unit. Bend the
tabs to secure. Secure opposite end of the standoff with one screw.
Rear Standoffs
CV60E
The 2 top rear standoffs are designed so that screws can be used to secure
the appliance to the rear wall if needed. Studs must be in this location if
choosing to screw this into studs.
Leveling legs
Leveling Legs
There are four levelling legs - two on each side that can be adjusted (with the
supplied tool--found in the manual package) if required.
Remove the screws securing the unit to the pallet
Due to the size and weight (480 pounds shipping weight) of the CV60E--lifting
and moving the unit will require 4 people.
Place a length (long enough to get a solid grip on each side) of 2 x 4 under
the handle on each side.
Lift and move the unit carefully.
Note : When in position, the handles may be removed from the unit by removing
6 screws on each handle. Ensure that when the handles are removed that the
screws are put back into place in all 12 holes locations where the handle had
been previously (6 per side). The handles can be recycled.
tooltip
Remove the screws securing the unit to the pallet.
Due to the CST60E's size and weight (556 pounds/252 kg shipping weight),
lifting and moving the unit requires 4 people.
Place a 2 x 4 long enough to provide a solid grip on each side under each handle.
Lift and move the unit carefully.
Before you start - removing the unit from the pallet
Rear Standoffs
The two top rear standoffs are designed so that screws can be used to secure
the appliance to the rear wall if needed. Studs must be in place for this opera-
tion. The flanges (see image opposite) are the standoffs.
Unit Assembly Prior to Installation
Before you start
Removing the unit from the pallet
Side standoff assembly CV60E
The CV60E has 4 standoffs, 2 on each side that need assembly before installing.
The standoffs are shipped in a flat position -- fold the standoff and install the
standoff onto the unit by sliding the 2 tabs into the slots on the unit. Bend the
tabs to secure. Secure opposite end of the standoff with one screw.
Rear Standoffs
CV60E
The 2 top rear standoffs are designed so that screws can be used to secure
the appliance to the rear wall if needed. Studs must be in this location if
choosing to screw this into studs.
Leveling legs
Leveling Legs
There are four levelling legs - two on each side that can be adjusted (with the
supplied tool--found in the manual package) if required.
Remove the screws securing the unit to the pallet
Due to the size and weight (480 pounds shipping weight) of the CV60E--lifting
and moving the unit will require 4 people.
Place a length (long enough to get a solid grip on each side) of 2 x 4 under
the handle on each side.
Lift and move the unit carefully.
Note : When in position, the handles may be removed from the unit by removing
6 screws on each handle. Ensure that when the handles are removed that the
screws are put back into place in all 12 holes locations where the handle had
been previously (6 per side). The handles can be recycled.
tooltip
Levelling Legs
Flanges
Summary of Contents for City CST60E-LP
Page 125: ...City Series CST60E 125 notes ...
Page 130: ...130 City Series CST60E warranty ...
Page 131: ......