53
j) Mixer Programming „Mix“
This programing permits controlling a slave channel via a master channel. The slave channel is taken along linearly,
with the two deflection directions and the deflection values of the slave servo, as well as the working point of the mixer
being programmable individually. All in all, 3 freely programmable linear mixers „Mix #1“ - „Mix #3“) are available.
Adjusting the mixers:
• Switch on the transmitter and call the function setting menu.
• Move the cursor arrow to the menu item „Mix“ with the two
buttons „UP“ and „DOWN“.
• Briefly push the button „OK“ to activate the menu item.
The display shows the indication for mixer #1 with the pre-set
mixing values.
• Push the buttons „UP“ or „DOWN“ to select the desired mixer
„Mix #1 - Mix #3“.
• When pushing the button „OK“, the cursor arrow will jump to
the mixer function. Pushing the buttons „UP“ or „DOWN“ can
activate „On“ or deactivate „Off“ the mixing function.
• When pushing the button „OK“, the cursor arrow will jump
to the master channel. Push the buttons „UP“ or „DOWN“ to
select the master channel now.
• When pushing the button „OK“ again, the cursor arrow will
switch to the slave channel. Push the buttons „UP“ or „DOWN“
to select the slave channel now.
Figure 45
Summary of Contents for HT-6
Page 1: ... Remote Control HT 6 2 4 GHz Item no 1310037 Version 04 15 7 ...
Page 69: ...69 ...
Page 70: ...70 ...
Page 71: ...71 ...
