Raymarine Dragonfly 6, Installation & Operation Instructions

Page: 19 / 116

3.4 Tools required for installation
1. Power drill.
2. Pozidrive screwdriver.
3. 3 mm (5/32) Allen key.
4. Marine grade sealant.
5. Suitable sized drill bit.
6. Adhesive tape.
7. 18 mm (23/32”) Hole saw (only required if you
are routing the cable through the transom.
Additional tools required
When surface mounting the display the following
additional tools are required.
1. Jigsaw.
2. 32 mm (1 1/4”) hole saw.
3. 7 mm (9/32”) spanner.
4. File.
3.5 Software updates
The software running on the product can be updated.
• Raymarine periodically releases software updates
to improve product performance and add new
features.
• You can update the software for your product using
a connected and compatible multifunction display.
• Refer to www.raymarine.com/software/ for the
latest software updates and the software update
procedure for your product.
• If in doubt as to the correct procedure for updating
your product software, refer to your dealer or
Raymarine technical support.
Caution: Installing software
updates
The software update process is carried
out at your own risk. Before initiating the
update process ensure you have backed
up any important iles.
Ensure that the unit has a reliable power
supply and that the update process is not
interrupted.
Damage caused by incomplete updates
are not covered by Raymarine warranty.
By downloading the software update
package, you agree to these terms.
Planning the installation
19