Rapiscan Mobile Trace User Manual Download Page 16

Page: 16 / 178

CAUTION:

If the device is used in a manner not specified by the manufacturer, the
protection provided by the device may be impaired.

CAUTION:

Always observe safe laboratory practices by referring to Safety Data
Sheet (SDS) before handling any material. For copies of any SDS, .

CAUTION:

The device is not intended for use outdoors during inclement weather
that includes, but is not limited to, rain and snow.

WARNING:

The power cord must be disconnected from the device before servicing.

WARNING:

User should use appropriate electrical safety precautions.

CAUTION:

Customer must comply with all applicable shipping regulations when
returning devices.

CAUTION:

Dispose of batteries within this product according to local regulations.

Battery Charger Warnings

WARNING:

Do not expose the charger or power supply to water or liquids. This is
not a sealed case.

WARNING:

Do not open the charger or power supply case. No user serviceable
parts are inside.

WARNING:

Do not cover the fan exhaust or obstruct the airflow. This will cause
overheating.

WARNING:

Use only the manufacturer's power supply, and observe terminal
polarity.

WARNING:

Place the charger in a cool spot, away from external heat sources.

CAUTION:

During recalibration the charger may become warm.

xiii

Rapiscan Systems Proprietary and Confidential

Summary of Contents for Mobile Trace



















































































































































































Search results

Summary of Contents for Mobile Trace

Reviews:

Related manuals for Mobile Trace

Brands by name

Popular brands

Rapiscan Mobile Trace, User Manual

Search results

Summary of Contents for Mobile Trace

Reviews:

Related manuals for Mobile Trace

Brands by name

Popular brands