Rapiscan Mobile Trace User Manual Download Page 122

Page: 122 / 178

2. Press Close.

3. Verify the desorber is connected securely.

4. Verify the sample filter connections are secure.

5. If the warning is not resolved, contact your technical support person or Rapiscan Systems Technical

Support.

(

see "Technical Support" on page 152)

Sample Flow Warning

The

Sample Flow Warning indicates the device is outside the calibrated range.

Figure 6-3

Sample Flow Warning

Resolution

1. Touch the warning on the status bar to display the warning details.

Figure 6-4

Sample Flow Warning details

2. Press Close.

3. Verify that routine maintenance has been performed. If routine maintenance has not been done, perform

maintenance.

4. If the warning is not resolved, contact your technical support person or Rapiscan Systems Technical

Support.

(

see "Technical Support" on page 152)

CHAPTER 6 │User's Guide

105

Rapiscan Systems Proprietary and Confidential

Summary of Contents for Mobile Trace



















































































































































































Search results

Summary of Contents for Mobile Trace

Reviews:

Related manuals for Mobile Trace

Brands by name

Popular brands

Rapiscan Mobile Trace, User Manual

Search results

Summary of Contents for Mobile Trace

Reviews:

Related manuals for Mobile Trace

Brands by name

Popular brands