Rapiscan Mobile Trace User Manual Download Page 70

Page: 70 / 178

6. Press the keyboard

icon to close the keyboard.

7. Press Is an Explosive or Is a Narcotic.

8. If you want to extend the sampling time once the substance is first detected, press Extend Sampling on

Detect.

9. Press Add.

Figure 4-11

Line information screen

10. Configure the fields as necessary.

NOTE:

These fields should be configured with support from Rapiscan Systems’ Technical Support.

(

see

"Technical Support" on page 152

)

11. Press OK until the

Substance Selection screen displays.

The newly added substance displays at the bottom of the list with a white background to separate any
added substances from the custom library.

Figure 4-12

Primary Substance Selection - substance added

12. Press OK until you return to the

Main screen.

CHAPTER 4 │User's Guide

Rapiscan Systems Proprietary and Confidential

Summary of Contents for Mobile Trace



















































































































































































Search results

Summary of Contents for Mobile Trace

Reviews:

Related manuals for Mobile Trace

Brands by name

Popular brands

Rapiscan Mobile Trace, User Manual

Search results

Summary of Contents for Mobile Trace

Reviews:

Related manuals for Mobile Trace

Brands by name

Popular brands