Rapiscan Mobile Trace User Manual Download Page 34

Page: 34 / 178

Figure 2-1

Negative ion dopant tube and packaging

Figure 2-2

Figure 2-3

Positive ion dopant tube and packaging

1. Wearing clean cotton gloves, open the plastic tubes, and remove the dopants.

NOTE:

The negative ion dopant tube is partially filled (approximately 2/3 full at 2ml) by design and to be
compliant with DOT shipping regulations.

2. Verify the device power is

OFF.

3. Unscrew the dopant chamber end cap.

4. Insert the dopant tubes into the dopant chamber.

NOTE:

The BHT tube is already installed the dopant chamber. For information on the BHT tube,

(

see "BHT

Vapor Mode Calibration Tube" on the next page

)

5. Replace the dopant chamber end cap.

CHAPTER 2 │User's Guide

Rapiscan Systems Proprietary and Confidential

Summary of Contents for Mobile Trace



















































































































































































Search results

Summary of Contents for Mobile Trace

Reviews:

Related manuals for Mobile Trace

Brands by name

Popular brands

Rapiscan Mobile Trace, User Manual

Search results

Summary of Contents for Mobile Trace

Reviews:

Related manuals for Mobile Trace

Brands by name

Popular brands