surgeon who is well farmiliar with this kind of injury to deal with it.
• If the following problems occur, please make a change.
I Attention I
1. Connector damage or leakage.
2. Outer layer of soft pipe wearing or cut or steel wire of
strengthened layer exposes.
3. Partial heave of soft pipe.
4. Obvious twist or flattening of soft pipe.
5. Steel wire of strengthened layer embeds in outer layer.
• Make sure all the pipe clamp, protection plate and heat-proof cap are
installed correctly to avoid vibration or overheat through friction with
other parts
• Correctly install the cap to avoid vibration or friction with other parts
which generate overheat.
• Choose proper container to load liquid when changing hydraulic oil or
filters. The liquid waste should be dealt with according to local
environment protection laws and rules.
77
Rules that should be followed when filling fuel or lubrication oil
the fuel, lubrication oil, hydraulic oil, anti-freezing liquid and brake
fluid can be lit by open fire. Please pay attention to following points:
I Attention I
*
Stop the engine when filling Tuel or lubrication oil.
*
No smoking.
*
The overflowing fuel, lubrication oil, hydraulic oil, anti-freezing
liquid and brake fluid should be wiped clean immediately.
*
All the container caps loading fuel, lubrication oil, hydraulic oil,
anti-freezing liquid and brake fluid should be tightened.
*
The place where adds or stores fuel, lubrication oil, hydraulic oil,
anti-freezing liquid and brake fluid should be well ventilated.
When refueling after checking the oil
level, stop the forklift on a flat
ground;
refuel
with
the oil of the same
code and number.
78
When refilling oil or lubricating grease,
clean the filling port or the grease nozzle.
(Mark: No Smoking)
No smoking and naked fire is
allowable in refueling or maintenance
of fuel system. Properly treat the oil
waste. Never directly drain away the oil
waste without any treatment.
Ranko R55 Forklift
Operator's Maintenance Manual
Storage & Maintenance
Ranko R55 Forklift
Operator's Maintenance Manual
Storage & Maintenance