RAM 1500 2WD 2021 Owner'S Manual Download Page 331

Page: 331 / 496

SAFETY

329

NOTE:



The TPMS is not intended to replace normal

tire care and maintenance or to provide

warning of a tire failure or condition.



The TPMS should not be used as a tire pres

sure gauge while adjusting your tire pressure,

unless your vehicle is equipped with a Tire Fill

Alert (TFA) system.



Driving on a significantly underinflated tire

causes the tire to overheat and can lead to

tire failure. Underinflation also reduces fuel

efficiency and tire tread life, and may affect

the vehicle’s handling and stopping ability.



The TPMS is not a substitute for proper tire

maintenance, and it is the driver’s responsi

bility to maintain correct tire pressure using

an accurate tire pressure gauge, even if

underinflation has not reached the level to

trigger illumination of the TPMS Warning

Light.



Seasonal temperature changes will affect

tire pressure, and the TPMS will monitor the

actual tire pressure in the tire.

Tire Pressure Monitoring Display

The Tire Pressure Monitoring System (TPMS)

uses wireless technology with wheel rim

mounted electronic sensors to monitor tire

pressure levels. Sensors, mounted to each

wheel as part of the valve stem, transmit tire

pressure readings to the receiver module.

NOTE:

It is particularly important for you to check the

tire pressure in all of the tires on your vehicle

monthly and to maintain the proper pressure.

The TPMS consists of the following

components:



Receiver module



Four Tire Pressure Monitoring System

sensors



Various Tire Pressure Monitoring System

messages, which display in the instrument

cluster



Tire Pressure Monitoring System Warning

Light

Tire Pressure Monitoring Low Pressure

Warnings

The Tire Pressure Monitoring System

(TPMS) Warning Light will illuminate

in the instrument cluster and a chime

will sound when tire pressure is low in

one or more of the four active road tires. In

addition, the instrument cluster will display a

graphic showing the pressure values of each

tire with the low tire pressure values in a

different color. An "Inflate to XX" message will

also be displayed.

Low Tire Pressure Display

21_DT_OM_EN_USC_t.book Page 329

Summary of Contents for 1500 2WD 2021

















































































































































































































































































































































































































































































































Search results

Summary of Contents for 1500 2WD 2021

Reviews:

Related manuals for 1500 2WD 2021

Brands by name

Popular brands

RAM 1500 2WD 2021, Owner'S Manual

Search results

Summary of Contents for 1500 2WD 2021

Reviews:

Related manuals for 1500 2WD 2021

Brands by name

Popular brands