RAM 1500 2WD 2021 Owner'S Manual Download Page 206

Page: 206 / 496

204

STARTING AND OPERATING

AUX C

AMERA

— I

QUIPPED

Your vehicle may be equipped with one or two

AUX Cameras, which display rearview and side

view images from the trailer on the

touchscreen.
Activation
The AUX Camera is activated by first pressing

the Backup Camera or Surround View Camera

(if equipped) button on the touchscreen,

followed by the AUX button located in the upper

left corner of the rearview display. The AUX

camera can also be activated when the vehicle

is in REVERSE by pressing the AUX button.
If equipped with two AUX Cameras, you can

switch between each camera by pressing the

AUX1 or AUX2 buttons on the Trailer Camera

display.

AUX1 Camera Button

AUX2 Camera Button

Deactivation
The AUX Camera is deactivated by pressing the

“X” in the upper right corner of the touchscreen.

This will return the display back to the

previously displayed screen.

NOTE:



If the AUX button is pressed and no AUX

Camera is connected, the touchscreen will

display a blue screen along with the message

“Camera System Unavailable.” The screen

can be exited out by pressing the “X” in the

upper right hand corner. This will return the

display back to the previously displayed

screen.



Zoom View is not available with the AUX

Camera feature.



The display will always default to the Trailer

Camera display (AUX 1).

SURROUND VIEW CAMERA SYSTEM — IF

EQUIPPED

The Surround View Camera system allows you

to see an on-screen image of the surroundings

and the Top View of your vehicle. This occurs

whenever the gear selector is in REVERSE or

when enabled through the Uconnect system.

The Top View of the vehicle will also show if any

doors are open. The image will be displayed on

the touchscreen along with a caution note

“Check Entire Surroundings”. After five

seconds, this note will disappear. The Surround

View Camera system is comprised of four

cameras located in the front grille, rear tailgate

and side mirrors.
NOTE:

The Surround View Camera system has

programmable settings that may be selected

through the Uconnect system

page 237.

Press this button on the touchscreen

to enter the Surround View Camera

menu in the Uconnect system.

When the vehicle is shifted into REVERSE, the

Rear View and Top View is the default view of

the system.
If the camera delay is turned on, the camera

image will display for up to 10 seconds after

shifting out of REVERSE. The camera image will

not display for 10 seconds if the vehicle speed

exceeds 8 mph (13 km/h), the vehicle is shifted

into PARK, or the ignition is placed in the OFF

position. The “X” button on the touchscreen

disables the display of the camera image.

21_DT_OM_EN_USC_t.book Page 204

Summary of Contents for 1500 2WD 2021

















































































































































































































































































































































































































































































































Search results

Summary of Contents for 1500 2WD 2021

Reviews:

Related manuals for 1500 2WD 2021

Brands by name

Popular brands

RAM 1500 2WD 2021, Owner'S Manual

Search results

Summary of Contents for 1500 2WD 2021

Reviews:

Related manuals for 1500 2WD 2021

Brands by name

Popular brands