RAM 1500 2WD 2021 Owner'S Manual Download

Page: 389 / 496

IN CASE OF EMERGENCY

387

Positive Battery Post

See below steps to prepare for jump starting:

1. Apply the parking brake, shift the

automatic transmission into PARK and

turn the ignition OFF.

2. Turn off the heater, radio, and all electrical

accessories.

3. Pull upward and remove the protective

cover over the remote positive (+) battery

post.

4. If using another vehicle to jump start the

battery, park the vehicle within the jumper

cables’ reach, apply the parking brake and

make sure the ignition is OFF.

UMP

TARTING

ROCEDURE

Connecting The Jumper Cables

Jumper Cable Connections

WARNING!



Take care to avoid the radiator cooling fan

whenever the hood is raised. It can start

anytime the ignition switch is ON. You can

be injured by moving fan blades.



Remove any metal jewelry such as rings,

watch bands and bracelets that could

make an inadvertent electrical contact. You

could be seriously injured.



Batteries contain sulfuric acid that can

burn your skin or eyes and generate

hydrogen gas which is flammable and

explosive. Keep open flames or sparks

away from the battery.

WARNING!

Do not allow vehicles to touch each other as

this could establish a ground connection and

personal injury could result.

WARNING!

Failure to follow this jump starting procedure

could result in personal injury or property

damage due to battery explosion.

CAUTION!

Failure to follow these procedures could

result in damage to the charging system of

the booster vehicle or the discharged vehicle.

21_DT_OM_EN_USC_t.book Page 387

Summary of Contents for 1500 2WD 2021

















































































































































































































































































































































































































































































































Search results

Summary of Contents for 1500 2WD 2021

Reviews:

Related manuals for 1500 2WD 2021

Brands by name

Popular brands

RAM 1500 2WD 2021, Owner'S Manual

Search results

Summary of Contents for 1500 2WD 2021

Reviews:

Related manuals for 1500 2WD 2021

Brands by name

Popular brands