RAM 1500 2WD 2021 Owner'S Manual Download Page 36

Page: 36 / 496

GETTING TO KNOW YOUR VEHICLE

(Continued)

EMORY

OSITION

ECALL

NOTE:

If a recall is attempted when the vehicle is not in

PARK, a message will display in the instrument

cluster display.

To recall the memory settings for driver one or

two, push the desired memory button number

(1 or 2) or the unlock button on the key fob

linked to the desired memory position.
A recall can be canceled by pushing any of the

memory buttons (S, 1, or 2) during a recall.

When a recall is canceled, the driver seat will

stop moving. A delay of one second will occur

before another recall can be selected.

SEATS

Seats are a part of the Occupant Restraint

System of the vehicle.

ANUAL

DJUSTMENT

RONT

EATS

)

— I

QUIPPED

Manual Front Seat Forward/Rearward

Adjustment

Both front seats are adjustable forward or

rearward. The manual seat adjustment handle

is located under the seat cushion at the front

edge of each seat.

Manual Seat Adjustment Bar

While sitting in the seat, pull up on the handle

and slide the seat forward or rearward. Release

the bar once you have reached the desired

position. Then, using body pressure, move

forward and rearward on the seat to be sure

that the seat adjusters have latched.

WARNING!



It is dangerous to ride in a cargo area,

inside or outside of a vehicle. In a collision,

people riding in these areas are more likely

to be seriously injured or killed.



Do not allow people to ride in any area of

your vehicle that is not equipped with seats

and seat belts. In a collision, people riding

in these areas are more likely to be seri

ously injured or killed.



Be sure everyone in your vehicle is in a seat

and using a seat belt properly.

WARNING!



Adjusting a seat while the vehicle is moving

is dangerous. The sudden movement of the

seat could cause you to lose control. The

seat belt might not be adjusted properly

and you could be injured. Adjust the seat

only while the vehicle is parked.



Do not ride with the seatback reclined so

that the shoulder belt is no longer resting

against your chest. In a collision you could

slide under the seat belt and be seriously or

even fatally injured. Use the recliner only

when the vehicle is parked.

WARNING!

(Continued)

21_DT_OM_EN_USC_t.book Page 34

Summary of Contents for 1500 2WD 2021

















































































































































































































































































































































































































































































































Search results

Summary of Contents for 1500 2WD 2021

Reviews:

Related manuals for 1500 2WD 2021

Brands by name

Popular brands

RAM 1500 2WD 2021, Owner'S Manual

Search results

Summary of Contents for 1500 2WD 2021

Reviews:

Related manuals for 1500 2WD 2021

Brands by name

Popular brands