RAM 1500 2WD 2021 Owner'S Manual Download Page 272

Page: 272 / 496

270

MULTIMEDIA

Repeat
In USB Mode, press the Repeat button on the

touchscreen to toggle the repeat functionality.

The Repeat button on the touchscreen is

highlighted when active. The Radio will continue

to play the current track, repeatedly, as long as

the repeat is active. Press the Repeat button

again to enter Repeat All. The radio will continue

to play all the current tracks, repeatedly, as long

as the repeat function is active. To cancel

Repeat, press the Repeat button a third time.
Shuffle
In USB Mode, press the Shuffle button on the

touchscreen to play the selections on the USB

device in random order to provide an interesting

change of pace. Press the Shuffle button on the

touchscreen a second time to turn this feature

off.
Audio
Audio settings can be accessed by pressing the

Audio button

page 259.

Info
In both Disc and USB Modes, press the Info

button on the touchscreen to display the

current track information. Press the Info or X

button on the touchscreen a second time to

cancel this feature.
Tracks
In both Disc and USB Modes, press the Tracks

button on the touchscreen to display a pop-up

with the Song List. The song currently playing is

indicated by an arrow and lines above and

below the song title. When in the Tracks List

screen you can rotate the Tune/Scroll knob to

highlight a track (indicated by the line above

and below the track name) and then push the

Enter/Browse knob to start playing that track.
In Bluetooth® Mode, if the Bluetooth® device

supports this feature, press the Tracks button

on the touchscreen to display a pop-up with the

Song List. The currently playing song is

indicated by a red arrow and lines above and

below the song title.
Pressing the Tracks button on the touchscreen

while the pop-up is displayed will close the

pop-up.

Media Voice Commands

Uconnect offers connections via USB,

Bluetooth®, and auxiliary (AUX) ports. Voice

operation is only available for connected USB

and AUX devices.

Push the VR button located on the steering

wheel. After the beep, say one of the following

commands and follow the prompts to switch

your media source or choose an artist.



“Change source to Bluetooth®”



“Change source to AUX”



“Change source to USB”



“Play artist Beethoven”; “Play album

Greatest Hits”; “Play song Moonlight

Sonata”; “Play genre Classical”

Did You Know: Press the Browse button on the

touchscreen to see all of the music on your USB

device. Your Voice Command must match

exactly how the artist, album, song, and genre

information is displayed.

21_DT_OM_EN_USC_t.book Page 270

Summary of Contents for 1500 2WD 2021

















































































































































































































































































































































































































































































































Search results

Summary of Contents for 1500 2WD 2021

Reviews:

Related manuals for 1500 2WD 2021

Brands by name

Popular brands

RAM 1500 2WD 2021, Owner'S Manual

Search results

Summary of Contents for 1500 2WD 2021

Reviews:

Related manuals for 1500 2WD 2021

Brands by name

Popular brands