RAM 1500 2WD 2021 Owner'S Manual Download Page 382

Page: 382 / 496

380

IN CASE OF EMERGENCY

EMOVING

PARE

IRE

1. Remove the spare tire before attempting to

jack up the truck. Attach the lug wrench to

the extension tubes with the curved angle

facing away from the vehicle.

2. Remove the protective cover over the

access hole for the winch mechanism by

sliding the cover upward.

Access Hole Cover Location

3. Insert the extension tube through the

access hole between the lower tailgate and

the top of the fascia/bumper and into the

winch mechanism tube.

Winch Mechanism Tube

Inserting The Extension Tubes Into The Access Hole

4. Rotate the lug wrench handle counter

clockwise until the spare tire is on the

ground with enough cable slack to allow you

to pull it out from under the vehicle.

Rotating The Lug Wrench Handle

5. Pull the spare tire out from under the

vehicle to gain access to the spare tire

retainer.

Pulling The Spare Tire Out

21_DT_OM_EN_USC_t.book Page 380

Summary of Contents for 1500 2WD 2021

















































































































































































































































































































































































































































































































Search results

Summary of Contents for 1500 2WD 2021

Reviews:

Related manuals for 1500 2WD 2021

Brands by name

Popular brands

RAM 1500 2WD 2021, Owner'S Manual

Search results

Summary of Contents for 1500 2WD 2021

Reviews:

Related manuals for 1500 2WD 2021

Brands by name

Popular brands