RAM 1500 2WD 2021 Owner'S Manual Download Page 396

Page: 396 / 496

394

IN CASE OF EMERGENCY

MERGENCY

OOKS

— I

QUIPPED

Your vehicle may be equipped with emergency

tow hooks.

Emergency Tow Hooks

NOTE:

For off-road recovery, it is recommended to use

both of the front tow hooks to minimize the risk

of damage to the vehicle.

ENHANCED ACCIDENT RESPONSE SYSTEM

(EARS)

This vehicle is equipped with an Enhanced

Accident Response System.
This feature is a communication network that

takes effect in the event of an impact

page 353.

EVENT DATA RECORDER (EDR)

This vehicle is equipped with an Event Data

Recorder (EDR). The main purpose of an EDR is

to record data that will assist in understanding

how a vehicle’s systems performed under

certain crash or near crash-like situations, such

as an air bag deployment or hitting a road

obstacle

page 355.



Towing this vehicle in violation of the above

requirements can cause severe transmis

sion and/or transfer case damage.

Damage from improper towing is not

covered under the New Vehicle Limited

Warranty.

CAUTION!

(Continued)

WARNING!



Do not use a chain for freeing a stuck

vehicle. Chains may break, causing serious

injury or death.



Stand clear of vehicles when pulling with

tow hooks. Tow straps may become disen

gaged, causing serious injury.

CAUTION!

Tow hooks are for emergency use only, to

rescue a vehicle stranded off road. Do not

use tow hooks for tow truck hookup or

highway towing. You could damage your

vehicle.

21_DT_OM_EN_USC_t.book Page 394

Summary of Contents for 1500 2WD 2021

















































































































































































































































































































































































































































































































Search results

Summary of Contents for 1500 2WD 2021

Reviews:

Related manuals for 1500 2WD 2021

Brands by name

Popular brands

RAM 1500 2WD 2021, Owner'S Manual

Search results

Summary of Contents for 1500 2WD 2021

Reviews:

Related manuals for 1500 2WD 2021

Brands by name

Popular brands