RAM 1500 2WD 2021 Owner'S Manual Download Page 59

Page: 59 / 496

GETTING TO KNOW YOUR VEHICLE

ATTERY

AVER

Timers are set to both the interior and exterior

lights to protect the life of your vehicle’s battery.
After 10 minutes, if the ignition is OFF and any

door is left open or the dimmer control is

rotated all the way up to the dome light on

position, the interior lights will automatically

turn off.

NOTE:

Battery saver mode is canceled if the ignition is

ON.

If the headlights remain on while the ignition is

placed in the OFF position, the exterior lights will

automatically turn off after eight minutes. If the

headlights are turned on and left on for eight

minutes while the ignition is OFF, the exterior

lights will automatically turn off.

INTERIOR LIGHTS

OURTESY

IGHTS

Courtesy and dome lights are turned on when the

doors are opened or the Dome ON button is

pushed on the overhead console. If your vehicle

is equipped with Remote Keyless Entry and the

unlock button is pushed on the key fob, the

courtesy and dome lights will turn on. When a

door is open and the interior lights are on, and

the Dome Defeat button on the overhead

console is pressed, the interior lights will turn off.

Front Map/Reading Lights

The overhead console lights can also be

operated individually as reading lights by

pushing the corresponding buttons.

Front Courtesy/Reading Lights

Three types of rear courtesy/reading lights are

available for your vehicle.



Push button on/off



Push lens on/off



Push round puck lens on/off (if equipped

with Dual Pane Sunroof)

NOTE:

The courtesy/reading lights will remain on until

the switch is pushed a second time, so be sure

they have been turned off before exiting the

vehicle. If the interior lights are left on after the

ignition is turned off, they will automatically turn

off after 10 minutes.

Dimmer Control

The dimmer controls are inboard and adjacent

to the headlight switch located on the left side

of the instrument panel.

Dimmer Controls

1 — Reading Light On/Off Buttons
2 — Dome Defeat Button
3 — Dome ON Button

1 — Ambient Light Control
2 — Instrument Panel Dimmer Control

21_DT_OM_EN_USC_t.book Page 57

Summary of Contents for 1500 2WD 2021

















































































































































































































































































































































































































































































































Search results

Summary of Contents for 1500 2WD 2021

Reviews:

Related manuals for 1500 2WD 2021

Brands by name

Popular brands

RAM 1500 2WD 2021, Owner'S Manual

Search results

Summary of Contents for 1500 2WD 2021

Reviews:

Related manuals for 1500 2WD 2021

Brands by name

Popular brands