GETTING TO KNOW YOUR VEHICLE
89
10. Raise the tailgate slightly, and remove the
support cables by releasing the lock tang
from the pivot.
NOTE:
Make sure tailgate is supported by you and/or a
second person when removing support cables.
Locking Tang
11. Remove the tailgate from the vehicle.
NOTE:
Do not carry the tailgate loose in the truck
pickup box.
If the tailgate is closed with the wire harness
disconnected, the tailgate can only be
opened by removing the inside panel and
unlatching the locking mechanism manually.
B
ED
S
TEP
— I
F
E
QUIPPED
Your vehicle may be equipped with an
extendable bed step on the driver’s side of the
tailgate to provide easier entry and exit into the
truck bed.
Bed Step Location
Bed Step Components
To extend the bed step, place your foot on the
protruding foot tab located on the left edge of
the bed step, and push rearward. A small
amount of force will release the spring load, and
extend the bed step out and away from the
tailgate.
NOTE:
Once the spring load is overcome, the bed step
will extend out quickly, so be sure to stand in a
position that will avoid coming into contact with
the step as it extends.
WARNING!
To avoid inhaling carbon monoxide, which is
deadly, the exhaust system on vehicles
equipped with “Cap or Slide-In Campers”
should extend beyond the overhanging
camper compartment and be free of leaks.
1 — Bed Step
2 — Foot Tab
2
21_DT_OM_EN_USC_t.book Page 89
